Types Of Shields

Shields are your primary method of protection from unwanted and/or negative energy, with a variety of different styles used for different purposes. While some people may settle on a preferred shielding method and stick pretty much to that, it is recommended that you learn and practice multiple shielding methods so that you’re better prepared in different situations.

This overview is not a complete list, since anyone can develop new methods. As with any situation, you should become proficient at analyzing a situation and determining the best shielding type to use. As with all Workings, intent is the key — you have to be 100% sure of the intent you give to the shields. Shields can also be given different colors or shapes depending on your preferred operating style.

Energy and focus/concentration requirements for any of these may vary depending on your skill and practice.

Shifting Techniques

1. Shifting:
Constantly altering the appearance of your shield. This technique can be applied to many types, provided you can maintain it. The Borg in the Star Trek TV show use ship shields that constantly change in frequency in order to defeat things like tracking beams — this is a similar idea.

2. Camouflage: By pulling in bits of energy from people around you, you can alter your outside energy “appearance” to look less like yourself and more like, say, the mundane person standing behind you in line. This is often used as a cloaking method. An example would be pulling fresh-dropped branches over your hiding place in the woods.

3. Confusion: Generates random amounts of “psi noise” in an attempt to confuse any scan or attack attempts. Mix with a redirection method for better results. An example would be turning on several radios at once, each tuned to a different station.

Redirection

1. Simple: This method redirects incoming energy and sends it back out. While it sounds similar to a mirror shield, it’s different because you need to interact with the incoming energy in order to redirect it.

2. Disguised: As above, but in the process of interacting with the incoming energy, you can alter it’s “fingerprint” to hide it’s initial source or characteristics.

Reflective:

1. Simple:This is a mental mirror surrounding you that causes all incoming energy to be reflected back out without effect. Can also be thought of a a “rubber ball” shield. If you like, this can also be modified to form a filter, only letting in the energy you want. An example would be a completely shiny surface, similar to hematite.

2. Multidirectional:
As above, but instead of reflecting energy back the way it came, reflects energy in any random direction, or ricochets off at particular angles. An example would be multifaceted crystal that throws light everywhere.

Walls:

1. Basic forcewall: This can be visualized as a ball, egg or some other shaped mass of energy surrounding you. You can give it particular colors if you desire, or leave it colorless.

2. Spinner walls: One or more layers of shields that also rotate on an axis. Commonly used with basic walls, but can be modified to use most shields.

Other Techniques:

1. Combinations: Interlocking two or more types of shields to make a more robust defense system. You MUST be skilled with the shields you intend to use in a layered format. This will take practice if you’re not used to it, and some common sense is required.

2. Filtering: Nearly any shield can be modified to filter, but often the filter capability adds a weak point in the shield where the preferred type of energy can be let in. A example is empathic filters that tone down the noise level of people’s emotions.

3. Invisibility: More potent (and thus takes more concentration/energy) than simple camouflage, This is much closer to “I’m not here” compared to camouflage’s “I’m not the person you’re looking for”.

4. Residence shields: Typically these are basic wall types, however they can be any type depending on the person making them. These operate on a larger scale, covering the space you live in (house, apartment, etc.). Residence shields are commonly used to dissuade wandering entities from entering, much like an alarm system discourages burglars from breaking in to steal your stuff.

Links:

http://kcwmu.rosewillow.net/index.php?option=com_content&task=view&id=253&Itemid=63
http://www.scribd.com/doc/4760300/Psi-Shield

Advertisements

~ by Misuchi Sakurai on March 24, 2009.

One Response to “Types Of Shields”

  1. worth noting-

    if you set your shields up as reflective or “mirror”, if someone’s anger is coming at you, you will be temporarily protected , but the anger will be reflected back at them.

    This can increase their anger and start a feed-back loop that escalates until
    a) the anger finally breaks through your shields, or
    b) the other person becomes so angry that he or she becomes out of control and does something inaappropriate or violent on the physical plane.

    I think it’d be better not to use mirror shields as your default setting.Or, if you do want something reflective, head more towards an “I’m rubber – you’re glue” concept

    Catherine
    Foresight

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: